Klin. remeň, profil SPA, refer. Dĺžka 950mm
| Profile | SPA |
|---|---|
| Datum Length (Lr) [mm] | 950 |
Material: Rubber. Tensile members from polyester.
Contact sides covered with textile, rubber coated.
Modern: These V-belts DIN 7753-1 / ISO 4184 with narrow, high shape offer higher power transmission than classic DIN 2215 V-belts, with lower flexibility. In most cases, classic V-belts can be replaced by narrow V-belts.
Maintenance required: After running in and prolonged use, retensioning is necessary.
Use: Theese V-belts are suitable for classical force-fitting drive systems at normal conditions. Because of the tight length tolerances, the belts can be used in sets.
Operating temperatur: -30° to +80°C.
Antistatic according to ISO 1813.
Width b = 12.7 mm.
Height h = 10 mm.
Width u = 5.8 mm.
Smallest medium pulley diameter = 90 mm.
Weight per Metre 0.123 kg.
Conversion Outside (LA) and Datum Length (LR): LA = LR + 18 mm
Important:
During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request.